Silvercrest SHAZ 22.2 E6 - Page 38

38 GB/IE
13
15
14
15 a
13
13 a
Crevice nozzle:
The crevice nozzle
12
is suitable for vacuuming
hard-to-reach spots, e.g. corners, cracks, seams,
recesses, crevices in upholstered furniture and for
cleaning the inside of cars.
Insert the crevice nozzle
12
into the opening on
the aluminium suction tube
15 a
intended for this
purpose, for example to acess hard-to-reach spots
when vacuuming, or directly into the opening
on the main unit
4a
intended for this purpose.
The crevice nozzle
12
must audibly click into
place when installing it on the aluminium suction
tube
15
/main unit
4
.
Remove the crevice nozzle
12
from the alumin-
ium suction tube
15
/main unit
4
by pushing the
release button
14
(aluminium suction tube
15
)
or
19
(main unit
4
) and removing the crevice
nozzle
12
from the aluminium suction tube/
main unit
4
.
12
15 a
14
15
Dust brush:
The dust brush
11
is suitable for vacuuming uphol-
stery and other textiles, but also for dusting sensitive
objects, e.g. keyboards, picture frames, books etc.
Insert the upper end of the dust brush
11
into
the opening on the aluminium suction tube
15 a
intended for this purpose or the opening on the
main unit
4a
intended for this purpose until it
audibly clicks into place.
Remove the dust brush
11
from the aluminium
suction tube
15
/main unit
4
by pushing the
release button
14
(aluminium suction tube
15
)
or
19
(main unit
4
) and removing the dust
brush
11
from the aluminium suction tube
15
/
main unit
4
.
15 a
14
15
11
The dust brush
11
has two functions:
You can use the dust brush
11
either with the brush
attachment or with the corner nozzle attachment.