Silvercrest SHAZ 22.2 E6 - Troubleshooting;Problem Solving

44 GB/IE
Always store the product dry and
at room temperature together
with all the accessory parts.
Do not expose the product to
direct sunlight or heat.
Troubleshooting/Problem solving
Problem Reason Solution
The main unit
4
won't switch on. The rechargeable battery
2
is not charged.
Charge the rechargeable battery
2
(see chapter “Charging the
rechargeable battery”).
The rechargeable battery
2
is not inserted.
Put the rechargeable battery
2
in the main unit
4
by pushing it
into the holder on the handle
1
of the main unit
4
until it locks
into place.
The main unit
4
switches itself
off during operation and the LEDs
of the rechargeable battery control
display
2b
flash.
The rechargeable battery
2
is not charged.
Charge the rechargeable battery
2
(see chapter “Charging the
rechargeable battery”).
The suction power is too weak.
The rechargeable battery
2
is too weak.
Fully charge the rechargeable
battery
2
(see chapter “Charging
the rechargeable battery”).
The filters
25
,
27
or filter carrier
26
are blocked or damaged.
Clean the filters
25
,
27
and the
filter carrier
26
(see chapter
“Cleaning the filters and dust
collector”). Replace damaged
filters.
The accessory is not properly
installed.
Check whether the accessory parts
are correctly installed/locked into
place (see chapter “Selecting,
assembling and disassembling
accessories”).
The suction opening of the
aluminium suction tube
15
or
an accessory part is blocked.
Check the aluminium suction tube
15
and the accessory part you
are using for blockages. Clean
the accessory (see chapter
“Cleaning the accessory parts”).