EasyManua.ls Logo

Silvercrest SHBS 500 E4 - Charging the Appliance; Charging Process and Indicators

Silvercrest SHBS 500 E4
474 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
GB│IE
 11 SHBS 500 E4
Charging the appliance
Note
The appliance is powered by a rechargeable lithium-ion battery.
Before using the appliance for the first time, the battery must be
charged. The plug LED
7 lights up red during charging.
If the plug LED 7 flashes red, the battery is nearly completely
discharged.
1) Switch off the appliance (if necessary) using the On/Off switch I/O
5 by sliding the On/Off switch I/O 5 to the position O.
2) Connect the barrel plug
9 of the mains adapter 8 to the appli-
ance (see fig. 1).
Fig. 1
3) Plug the mains plug of the mains adapter
8 into an easily accessi-
ble mains socket.
4) The battery charges and the plug LED
7 lights up red. The
battery LED 6 will flash blue as soon as the battery is fully
charged.

Table of Contents

Related product manuals