GB│IE
│
3 ■SHBS 500 E4
Warnings and symbols used
The following warnings and symbols are used in these operating
instructions, on the packaging and on the device (where applicable):
DANGER! A warning with this symbol and the
signal word "DANGER", indicates an imminently haz-
ardous situation which will result in death or serious
injury if not avoided.
WARNING! A warning with this symbol and the
signal word "WARNING", indicates a potentially
hazardous situation which could result in death or
serious injury if not avoided.
CAUTION! A warning with this symbol and the
signal word "CAUTION", indicates a potentially
hazardous situation which could result in a minor or
moderate injury if not avoided.
ATTENTION! A warning with this symbol and the
signal word "ATTENTION", indicates a potential
situation which could result in property damage if
not avoided.
A note provides additional information which
makes handling the device easier for you.
∼
Alternating current (AC)/alternating voltage
Direct current (DC)/direct voltage
To Next Page
Loading...
