Silvercrest SHF 1800 A2 - 11.4 Switching on the lighting; 11.5 Manual settings; 11.6 Switching on the rotation function; 11.7 Using Programs

98
GB
11.4 Switching on the
lighting
When the light symbol 32 is visible in the
display2, you can switch the interior light-
ing on and off:
• Press the light button 32 to switch the
lighting on or off again.
• The light symbol 32 flashes while the
lighting is on.
• The lighting will switch off automatically
after approx. 2 minutes.
11.5 Manual settings
While the device1 is switched on, the tem-
perature buttons +/–22 and the timer
buttons +/–29 are visible. You can use
these to change the settings for temperature
and cooking time whenever you like, e.g.
even if a program is already running.
• With the temperature buttons +/–  22
you can set the temperature between
40 °C and 200 °C:
- Press briefly for 5 °C steps.
- Keep pressed for fast forward/re-
verse.
• With the timer buttons +/–29 you
can set the cooking time between 1 and
60 minutes:
- Press briefly for 1-minute steps.
- Keep pressed for 5-minute steps.
NOTE: when the food dehydration
program is set, the temperature can only
be adjusted up to a maximum of 80 °C. The
cooking time can be set between 2 (02:00 )
and 24 (24:00 ) hours in 30-minute steps.
11.6 Switching on the
rotation function
When the rotation symbol 30 is visible in
the display2, you can switch the rotation
function on and off manually:
• Press the rotation button 30 to switch
the rotation function on or off again.
• The rotation symbol 30 flashes while
the rotation function is on.
NOTES:
• When the rotary spit program is set,
the rotation function is switched on auto-
matically.
• If you use the rotary spit10 or the rotat-
ing basket12 with a different program,
switch on the rotation function manually.
11.7 Using Programs
The device has preset programs for many
foods and types of preparation. When you
select a program, you can also carry out the
following settings at any time
- Temperature
- Cooking time
- Switch on/off the rotation function
1. Prepare the food and place it into the
device (see “Using the accessories” on
page 89) with the appropriate accesso-
ry.
2. Select the desired program (see “The
programs at a glance” on page 88)
and use the cooking table as a guide
(see “Cooking table” on page 91).
3. Switch the device on using the Start/
Stop button 31.
4. Press the desired program button33.
The corresponding symbol flashes.
5. If necessary, make manual adjustments
to the temperature and cooking time.
__351606_2007_B5.book Seite 98 Montag, 7. Dezember 2020 3:16 15