Silvercrest SHFD 2150 A2 - Page 13

12 GB
Cleaning and storage
 The product shall not be
exposed to any dripping or
splashing water.
 Disconnect the product from the
power outlet during periods of
disuse and before cleaning.
 Refer to the “Cleaning and
care” section for instructions on
how to clean the product.
 Before first use
 Remove all the packaging materials.
NOTE: Possible production residues lead to
the formation of odours during initial start-up.
This is normal and does not indicate a
malfunction of the product.
 Operate the product with an empty bowl
[5]
for approx. 10 to 15minutes at 200°C
to remove any production residues. Ensure
sufficient ventilation.
 Clean the product (see “Cleaning and care”).
 Operation
Indicator Status
Press
(Yes/No)
Function
Button
[] [] [] [] []
On (Lights up) Yes
Press once to activate the function. 1 beep
sounds.
Button
[] []
On (Lights up)
and flashes
Yes
During a paused program, press once to edit
the function or resume the program.
Functional
setting button
[] [] []
Dim Yes
Press once to activate the function. 1 beep
sounds.
Flashes Yes
The corresponding function is activated and
being edited. Press and hold for 3 seconds to
cancel the function. 1 beep sounds.
On (Lights up) Yes
The corresponding function is activated. Press
once to edit the function. Press and hold for
3 seconds to cancel the function. 1 beep
sounds.
Menu selection
display
[] []
On (Lights up) No The corresponding function is operating.
Dim No
The corresponding functions are available for
selection.
[]
On (Lights up) No Heating element and fan are operating.
Flashes No Only fan is operating.
[] / []
On (Lights up) No The corresponding function is operating.