Silvercrest SHFD 2150 A2 - Starting Cooking

15GB
Setting the alarm
You can set an alarm to remind you to thoroughly
mix the food at set intervals.
 Preparation: Make the settings (see “Selecting
a program”).
 Activate the alarm: Press
[].
[] is flashing. The alarm is preset to every
5 minutes.
Available intervals: 1 to 60 minutes with
1 minute intervals.
Button Function (time)
[]
Increase time (max. 60 minutes)
[]
Decrease time (min. 1 minute)
 After setting the alarm time, it is not necessary
to press any button to reactivate the alarm.
 After setting the alarm: If you want to edit the
cooking temperature/time, or select another
menu, press
[] or wait for 10seconds to
resume main program settings.
 If you want to activate/edit the keep warm
function or the delay timer function, press
[] or [].
 When cooking starts, the alarm function starts
directly.
[] remains lit.
 Cancel the alarm: Press
[] to pause
cooking. Then, press and hold
[] for
3 seconds.
NOTES:
 Cooking is NOT paused while the alarm
sounds. The alarm resets and sounds again
after the set interval elapses.
– Operation is only paused when you
remove the bowl
[5] from the cooking
chamber
[6].
– When you reinsert the bowl
[5], cooking
continues automatically.
 If the combined weight of the basket
[4],
bowl
[5] and food is too heavy to shake it
thoroughly: Set down the bowl on a heat-
resistant surface and remove the basket
(ill. E).
 Starting cooking
 Once you have made the desired settings,
press
[]. Cooking begins.
NOTES:
 During cooking, the following indicators are
active:
–
[] lights up
– The selected menu selection display
[] []
lights up. The remaining unselected menu
goes off.
 To cancel all settings and operation, press
and hold
[] for 3 seconds. The product
switches to program selection mode.
 During cooking, the display
[1] toggles
between the set temperature and the
remaining cooking time. Temperature
[] []
and timer [] [] can be adjusted any time
during cooking.
 After cooking has ended, the fan continues to
run for 1 minute to cool down the product.
The value display
[] shows the countdown
time (in seconds).
[] and [] are
flashing during cool down.
 To switch to the standby mode during cooling
down period, press and hold
[] for
3 seconds.
 After the cooling down period has ended, the
product switches to standby mode. A double
beep sounds 5 times.
 You can remove the bowl
[5] at any time and
do not need to wait for the fan to turn off.
All indicators go off and the value display
[]
shows “–––”.