Silvercrest SHFD 2150 A2 - Pausing Cooking; Cancelling Cooking; Keep Warm; Delay Timer

16 GB
 Pausing cooking
You can pause cooking e.g. if you wish to change
a setting.
 Pausing cooking (pause mode): Press
[].
 When cooking is paused:
[], [],
[] and the selected menu selection
display
[], [] are flashing.
 Continuing cooking: Press
[] again.
NOTES:
 The heating element and the timer are
stopped when cooking is paused. The fan
keeps on running in order to prolong the life
expectancy of the product.
 When cooking is paused: If the bowl
[5] is
removed from the cooking chamber
[6], the
fan goes off as well.
 When cooking is paused:
– the following settings can be made:
• edit cooking temperature/time
• activate/edit alarm intervals
• activate/edit keep warm function
– the following settings cannot be made:
• Menu selection
• Delay timer (already passed/completed)
 Cancelling cooking
 Press and hold [] for 3 seconds during
cooking.
 After cooking has been cancelled, the fan
continues to run for 1 minute to cool down the
product.
 Alternatively, press and hold
[] for
3 seconds to cancel all settings and
operation. The product switches to program
selection mode. The product skips the cool
down function in this case.
 Keep warm
 Press [] after pausing cooking by
pressing
[] to activate the keep warm
function automatically when cooking ends.
[] flashes when editing keep warm time,
and lights up when activated.
 At the beginning, temperature is set to 80 °C
and the time is set to 30 minutes.
Only the time can be adjusted:
Button Function (time)
[]
Increase time (max. 60 minutes)
[]
Decrease time (min. 1 minute)
 After setting the keep warm time, it is not
necessary to press any button to reactivate
the keep warm function.
 After setting the keep warm function: If you
want to edit the cooking temperature/time, or
select another menu, press
[] or wait for
10seconds to resume main program settings.
 If you want to activate/edit the alarm function
or the delay timer function, press
[] or
[].

[] lights up during cooking to indicate
that the keep warm function has been
activated.
 After cooking has ended, the product switches
to keep warm mode automatically.
A double beep sounds 5 times.
[] lights
up.
 Cancel the activation of keep warm function:
Press
[] to pause cooking. Then, press
and hold
[] for 3 seconds.
 Cancelling keep warm mode: Press and hold
[] for 3 seconds.