9
SKD 2300 B2
GB
IE
Set-up location requirements
For safe and trouble-free operation of the appliance, the set-up location must fulfil
the following requirements:
■ The appliance may only be operated in a vertical position and fully assembled.
■ When using the feet, the device must be placed on a firm, flat and even floor.
■ When wall mounting, the appliance must only be mounted in a fixed position on
a vertical wall.
■ The minimum clearances between the housing and other objects must be main-
tained: 10 cm at the sides, 30 cm above, 15 cm below (with wall mounting) and
50 cm in front.
■ Ensure that air can always enter and escape freely. Otherwise, there could be a
heat build-up in the appliance.
■ Do not place the appliance in a hot, wet or extremely moist environment or in the
vicinity of flammable materials.
■ The mains power socket must be easily accessible so that the power cable can
be easily disconnected in an emergency.
■ Environmental temperature range: 0 to +40°C
■ Humidity (no condensation): 5–85%
DANGER
Fire risk due to contact with materials!
There is a risk of fire if the heating elements come into contact
with flammable materials!
► Do not place the appliance in the vicinity of curtains and other flammable
materials.
► Do not allow flammable materials (i.e. textiles) to come into contact with
the appliance.
► Do not cover the appliance.
To Next Page
Loading...
