13
SKD 2300 B2
GB
IE
♦ To ensure that the appliance hangs vertically on the wall, the other two wall
brackets
38
are used as spacers (see Fig. spacers).
Fig. spacers
♦ Screw the two wall brackets
38
onto the underside of the appliance with the
supplied screws
35
.
♦ Hang the appliance from the top into the wall brackets
34
.
NOTE
► To make the mounting more stable, the two wall brackets
38
can also be
screwed to the wall.
Handling and operation
NOTE
► All functions can be used with the buttons on the device as well as with the
remote control
25
.
This section provides you with important information on handling and using the
appliance.
Switching the appliance on and off
The main switch
8
disconnects the appliance fully from the mains power supply.
♦ Insert the power plug into a mains wall socket.
♦ Switch on the appliance using the main switch
8
first; or switch off at the
main switch last if you are no longer using the appliance.
♦ When switched on, the integrated control lamp in the main switch
8
lights
up.
There will be a beep and the display
2
lights up.
♦ Now press the on/off button
21
or
33
.
The appliance is now ready for use.
To Next Page
Loading...
