Silvercrest SKHO 50 B2 - Troubleshooting; Fault Causes and Remedies

GB
│
IE
│
15 ■
SKHO 50 B2
Dispose of the packaging in an environmentally friendly manner.
Note the labelling on the packaging and separate the packaging material
components for disposal if necessary. The packaging material is labelled with
abbreviations (a) and numbers (b) with the following meanings:
1–7: plastics,
20–22: paper and cardboard,
80–98: composites
Troubleshooting
Fault causes and remedies
If you cannot connect the headphones to a Bluetooth
®
-compatible playback device,
proceed as follows:
♦ Make sure that the Bluetooth
®
function is activated on the playback device.
♦ Make sure that the audio cable
w is connected to the AUX IN socket 8 of the
headphones. When an audio cable w is connected, the Bluetooth
®
function of
the headphones is deactivated.
♦ Check that the headphones are switched on.
♦ If you use several Bluetooth
®
playback devices, ensure that any previous connec-
tion is disconnected. There may be a previously paired playback device still within
range.
♦ Make sure that the headphones are no more than 10 metres from the playback
device and that no obstacles or electronic devices are placed between them.
NOTE
► In an environment with high-frequency interference, you may experience noise
interference during music playback via Bluetooth
®
. As soon as the interference has
ceased, music playback should automatically continue in Bluetooth
®
mode without
any further problems.