Silvercrest SKR 800 B2 User Manual

GB
│
IE
│
NI
│
15 ■
SKR 800 B2
Adjusting stations manually
♦ Press the button for 2 seconds and the frequency display flashes.
You must make your setting within 5 seconds otherwise you will have to
press the button again for 2 seconds.
♦ Press the Preset + | SEARCH +
or the Preset − | SEARCH − button
to search for a frequency in steps of 0.1MHz.
♦ Press the button for 2 seconds and the frequency display stops flashing
and the station is saved.
The station frequency is shown on the display
and the speakers are
switched off during the station search. If a station broadcasting in stereo is being
received, ST appears on the display.
Storing stations manually
♦ Press the Preset + | SEARCH + or the Preset − | SEARCH − button
for about 2 seconds to search for a frequency.
♦ Press the
| Mem/AMS button briefly. The current preset number
flashes on the display
, e.g. .
♦ Press the Preset + | SEARCH + or the Preset − | SEARCH − button to
search for a frequency.
♦ Press the
| Mem/AMS button to save the station in the selected preset.
Calling up preset radio stations
♦ Press the Preset + | SEARCH + or the Preset − | SEARCH − button
to call up the saved radio station.
Automatic station search (AMS function)
The device uses the AMS function to automatically search for stations and
saves them in the 20 preset slots of the device. The device starts at the lowest
frequency. Depending on reception, it is possible that not all 20 presets can be
assigned.
♦ Press the
| Mem/AMS button for about 2 seconds. The device
begins the station search and allocates the stations found to the preset slots
from to max. . Every time a station is saved, the frequency remains
briefly on the display
. Once all the station presets are filled, if receivable,
the search is terminated and the station saved in the first preset is played.

Silvercrest SKR 800 B2 Specifications

General

Brand	Silvercrest
Model	SKR 800 B2
Category	Radio
Language	English