GB
│
IE
│
7 ■
SMUD 860 A1
Assembly and setting up
1) Take all the parts out of the box and remove the packaging material and any
protective wrapping or stickers.
2) Clean all components as described in the section "Cleaning and Care".
Ensure that all parts are completely dry.
3) Place the appliance on a clean and level heat-resistant surface.
NOTE
Make sure that the steam coming out of the steam vent has enough space to
escape.
4) Attach the cutlery bracket onto the mount on the side of the appliance.
You can store the ladle / and spoon in it.
5) Open the appliance lid by pressing the lid release .
6) Insert the inner bowl - so that the lifting aids of the inner bowl - fit into the
recesses in the sides.
7) Insert the connection plug into the socket on the appliance.
8) To steam food, insert the steamer 3 into the inner bowl -.
9) Insert the plug into a mains power socket. All of the symbols will light up.
The "Start" indicator lamp will flash.
10) Close the appliance lid .
To Next Page
Loading...
Need help?
General
