■ 8
│
GB
│
IE
SMUD 860 A1
Before first use
Once the appliance is assembled and connected to the mains supply:
1) Open the appliance lid by pressing the lid release and opening the appli-
ance lid .
2) If the steamer 3 is inserted, remove it.
3) Remove the inner bowl - by its lifting aids and fill it with approximately
1 litre of water. Replace the inner bowl - into the base .
4) Press the menu button 6
until the "Steam" symbol flashes.
5) Press the "min/-
" button % until the timer is set to 00:30.
6) Press the start button 0
.
The appliance heats up. As soon as the correct steaming temperature has
been reached, the time will start counting down backwards. As soon as the
programmed time has elapsed, you will hear 5 beeps.
7) Press the stop button 1
. Tip the water away.
8) Allow the appliance to cool down and clean the inner bowl - (see section
"Cleaning and maintenance").
NOTE
The first time the appliance heats up, some odour may be generated due to
production-related residue. This is normal and is completely harmless. Ensure
sufficient ventilation; for example, by opening a window.
To Next Page
Loading...
Need help?
General
