Silvercrest SMUD 860 A1 - Keep-Warm and Timer Functions

■ 28
│
GB
│
IE
SMUD 860 A1
7) Use the buttons min/- % and h/+ + to set the desired time.
8) Press the temperature button !
. The "Multi-function preset" display flashes.
9) Press the h/+ button +
to activate the next preset.
Do the same for all other presets.
10) Once you have programmed the desired presets in the right order, press the start
button 0
.
The appliance now carries out all the saved cooking processes in sequence.
When the programmes finish, the appliance switches to the keep-warm mode for
a maximum of 24 hours.
■ If you want to stop the programmes or the keep-warm function, press the stop
button 1
.
Keep-warm function
The keep-warm function starts automatically after a programme finishes (except
the "Yoghurt" programme). The prepared meals are kept warm for up to 24
hours at a temperature of 70–75°C.
If the keep-warm function is activated, the "Keep warm" indicator lamp, inte-
grated into the stop key 1
, will be lit. This lamp also lights up during the
cooking process, indicating that the keep-warm function will be activated after
the programme finishes.
You can deactivate the keep-warm function at any time during the cooking
process by pressing the start button 0
. The "Keep warm" indicator lamp
extinguishes. If you want to reactivate the keep-warm function during the cooking
process, press the start button 0
again.
To interrupt the keep-warm function while it is running, press the stop button 1 .
Delayed cooking/timer
You can set a time delay for all programmes.
1) Add the ingredients to the inner bowl -, place the inner bowl - into the base 
and close the appliance lid .