Silvercrest SMUD 860 A1 User Manual

■ 10
│
GB
│
IE
SMUD 860 A1
General
1) Press the stop button 1 . The appliance is in standby mode: All symbols
are shown on the display; the "start" indicator lamp flashes.
2) To select a programme, press the menu button 6
until the symbol of the
desired programme flashes.
If this programme allows you to set a temperature, the temperature indication on
the bottom left of the display will show the set value.
3) If you want to change the preset cooking time, press the h/+ +
or min/-
%
buttons until the desired time is shown on the display.
4) Press the start button 0
to start the programme. In the "Sear", "Pasta", and
"Steam" programmes, the set time starts counting down in 1-minute steps once the
device has reached the desired temperature. In all other programmes, the set time
counts down immediately after you press the start button 0 .
NOTE
During the cooking process, the symbol and the symbol , the remaining
duration of the programme, and the symbol of the currently active programme
are displayed.
The indicator lamp "Start", which is integrated into the "Start" button 0
, is lit.
The indicator lamp "Keep Warm", which is integrated into the "Stop"
button1
, is lit.
It indicates that the keep-warm function is activated (indicator lamp on) and
will start automatically after the programme finishes.
You can deactivate the keep-warm function at any time during the cooking
process by pressing the start button 0
.
5) To interrupt a programme or the keep-warm function, press the stop button 1
.

Silvercrest SMUD 860 A1 Specifications

General

Brand	Silvercrest
Model	SMUD 860 A1
Category	Kitchen Appliances
Language	English