Silvercrest SMUD 860 A1 - Page 18

■ 14
│
GB
│
IE
SMUD 860 A1
"Sear" programme
You can use this programme to sear meat or fish.
Configurable tempera-
ture
approx. 100–170°C in increments of 5°C
Configurable time
10 minutes to 1 hour
in 5-minute increments
Keep-warm function
yes
up to 24 hours
Symbol in the display
1) Press the menu button 6 until the "Sear" symbol flashes.
2) If you want to change the preset cooking time of 30 minutes, press the min/-
button %
to set the minutes and the h/+ button + to set the hours.
3) Press the temperature button !
. The temperature display flashes.
The pre-set temperature is 140°C.
4) Use the min/- %
and h/+ + buttons to set the required temperature.
5) Press the start button 0
. The "start" indicator lamp lights up and the appli-
ance heats up.
6) Wait until the appliance has heated up. As soon as the temperature has been
reached, you will hear a beep and the set time will start counting down.
7) Place the ingredients into the inner bowl -. Flip the food as necessary.
When the programme finishes, the appliance switches to the keep-warm mode
for a maximum of 24 hours.
■ If you want to stop a programme or the keep-warm function, press the stop
button 1
.