SND 3600 D3
■ 8
│
GB
│
IE
│
NI
Connecting to a computer
System requirements
Operating system: Windows XP/Vista/7/8/10,
Mac 10.10‒10.15
Slot: USB connection (USB 2.0)
♦ Connect the micro-USB plug on the USB cable
8 to the micro-
USB port
3 on the scanner.
♦ Connect the USB plug on the USB cable
8 to a powered-on
PC. The computer recognises the new hardware and starts in-
stalling the drivers automatically. This process can take a around
a minute. The PWR LED
1 lights up as soon as the scanner is
properly connected.
Installing the software
ATTENTION
► Important files may be changed or overwritten during the
installation of the software! Before installing the installing
the software, make a backup of your original files to ensure
that you will be able to access them later if problems occur
during installation.
Installation on Windows
NOTE
► If your computer does not have a CD drive, visit the following
website to download the software:
www.kompernass.com/345185_2004
► If the autostart function is deactivated and the installation
does not start automatically, you can start the installation
with a double-click on the "WinSetup.exe" file in the main
directory of the CD.
To Next Page
Loading...
