Silvercrest SND 3600 D3 - Handling and use; Inserting negatives

SND 3600 D3
■ 10
│
GB
│
IE
│
NI
Handling and use
Inserting negatives
♦ Unlock the catch on the front of the negative holder 5 and
open the holder.
♦ Lay the negative in the negative holder
5 the right way up.
Ensure that holes of the negative strip are placed on the corre-
sponding retaining tabs on the holder, so that the negative strip
can not move.
♦ Close the negative holder
5 so that the lid is firmly shut.
♦ Now insert the negative holder
5 with the triangle marking at
the front and visible into the slot 4 on the right (see figure 1).
♦ Push the negative holder
5 into the slot 4 until it audibly clicks
into the first position. For additional negatives, push the negative
holder 5 further in until it audibly clicks into the next position.
Figure 1 Figure 2