Silvercrest SRH 5 B2 - DAB+ Station Management; Saving and Recalling Favourite Stations

■ 48 │ GB
│
IE
SRH 5 B2
♦ Press the VOLUME | ENTER/SCAN dial6 to confirm the selection.
The display 1 shows the station signal strength as a bar graph.
♦ Move the telescopic aerial
0 or change the location of the device to
improve the signal strength of a station.
Pay attention to the bars showing the signal strength. For optimum signal
strength, the bars should be as high as possible.
Saving your favourite stations
♦ In DAB+ radio mode, press the TUNE+8 or TUNE−7 button to select a
DAB+ radio station from the station list.
♦ Press the VOLUME |
ENTER/SCAN dial 6 to confirm the selection.
♦ Press the PRESETbutton
5 for approx. 2 seconds. If radio stations have
already been stored, the display 1 shows the preset with the last radio
station selected. If no radio stations have yet been stored, the display 1
shows Store preset 1: (Empty).
♦ Briefly press the TUNE+
8 or TUNE−7 button (several times if neces-
sary) or turn the VOLUME |
ENTER / SCAN dial6 to select the
desired preset.
♦ Press the VOLUME |
ENTER/SCAN dial6 to store the station in
the selected preset. The display
1 shows Preset (1-40) stored.
NOTE
► Stored radio stations are overwritten if you store other stations in station
presets that are already occupied.
Calling up saved stations
♦ In DAB+ radio mode, briefly press the PRESET button 5 to call up the
DAB+ radio stations stored in the presets. The display
1 shows the
message Preset Recall.
♦ Press the TUNE+
8 or TUNE−7 button several times or turn the
VOLUME |
ENTER / SCAN dial6 to select the one of the
presets with a stored radio station.
♦ Briefly press the VOLUME |
ENTER/SCAN dial 6 to play the
selected radio station.