Silvercrest SRH 5 B2 - Page 61

■ 58 │ GB
│
IE
SRH 5 B2
♦ Press the TUNE+8 or TUNE−7 button several times or turn the
VOLUME | ENTER / SCAN dial6 to set the alarm duration
(15, 30, 45, 60, 90, 120 minutes).
♦ Press the VOLUME |
ENTER/SCAN dial6 to confirm the entry.
The display 1 shows the message Alarm (1/2) Source.
♦ Press the TUNE+
8 or TUNE−7 button or turn the VOLUME |
ENTER / SCAN dial6 to set the sound source of the alarm clock. You can
choose between an alarm tone (Buzzer), the last station you listened to or
a stored DAB+ or FM radio station (DAB/FM).
♦ Press the TUNE+
8 or TUNE−7 button or turn the VOLUME |
ENTER / SCAN dial6 to select the desired sound source.
♦ Press the VOLUME |
ENTER/SCAN dial6 to confirm the entry.
The display1 shows the message Daily.
♦ Press the TUNE+
8 or TUNE−7 button or turn the VOLUME |
ENTER / SCAN dial6 to set the days (daily, once, weekends, weekdays)
on which the alarm should be activated.
♦ Press the TUNE+
8 or TUNE−7 button or turn the VOLUME |
ENTER / SCAN dial6 to select the desired days.
♦ Press the VOLUME |
ENTER/SCAN dial6 to confirm the selection.
The volume level appears on the display
1.
♦ Press the TUNE+
8 or TUNE−7 button or turn the VOLUME |
ENTER / SCAN dial6 to set the desired volume of the alarm clock.
♦ Press the VOLUME |
ENTER/SCAN dial6 to confirm the setting.
The display 1 shows the message Alarm Off.
♦ Press the TUNE+
8 or TUNE−7 button or turn the VOLUME |
ENTER / SCAN dial6 to select Alarm On.
♦ Save your settings by pressing the VOLUME |
ENTER / SCAN
dial6. The display 1 shows the message Alarm Saved. The alarm
clock is now activated.
NOTE
► The alarm settings are only saved if you then confirm your settings under
the menu option Alarm On or Alarm Off by pressing the VOLUME |
ENTER / SCAN dial6.
► As soon as Alarm 1 and/or Alarm 2 are active,
an alarm symbol is
shown on the left and/or right of the display1 for each active alarm.