Silvercrest SSJ 300 B3 - Page 35

33
GB
Insert the seal21
2. Place the seal21 into the working con-
tainer8.
Mount the working container8
3. Place the working container8 on the
base unit13 with the
z
marking
pointing to the open lock symbol .
4. Turn the working container8 clockwise
until the
z
marking points to the closed
lock symbol
.
NOTE: if you want to make a sorbet, skip
the following two assembly steps. Insert the
sorbet assembly19 instead of the holder7
and the screen assembly6 (see “Insert the
sorbet assembly” on page 35).
Insert the holder7
5. Place the holder7 into the working
container8.
21
8
13
7
8
__352263_2007_Slow_Juicer_B8.book Seite 33 Montag, 7. Dezember 2020 4:49 16