Silvercrest SSWR C2 - Cleaning the Water Tank

22 GB/IE/NI
6. Clean the HEPA filter
[] with compressed air
or by lightly tapping it.
7. Clean the primary filter
[9] with the cleaning
brush
[].
8. Rinse out the dust collector
[] with water,
if necessary. Allow the dust collector to dry
completely.
9. Reinsert the HEPAfilter
[]. Ensure a secure
fit of the HEPAfilter.
10. Fold the primary filter
[9] downwards.
11. Close the top cover
[].
12. Reinsert the dry dust collector
[] into the
product.
Cleaning and replacing the side brushes
o If the side brushes[] [] are dirty or
damaged, they must be cleaned or replaced.
o Clean the side brushes[] [] by hand with
a soft cloth.
o To replace the side brushes[] [], pull them
out carefully.
o Attach the included spare side brushes
on the product (see “Attaching the side
brushes”).
Cleaning the anti-drop sensors and the
charging contacts
NOTE: If the anti-drop sensors[] are dirty,
the function of the product can be impaired.
1. Wipe the anti-drop sensors
[] and the
charging contacts
[] at the bottom of the
product with a dry, soft cloth.
2. Wipe the charging contacts
[7] on the
charging dock
[5] with a dry, soft cloth.
Cleaning the roller brush
(Fig.J)
1. Gently press the 2latches
[] and remove
the roller brush cover
[].
2. Remove the roller brush
[] from the product.
3. Remove hair and dirt from the roller
brush
[].
4. Reinsert the roller brush
[].
5. Close the roller brush cover
[].
Cleaning the water tank
1. After using the mop function, remove the
water tank
[] from the product.
2. Remove the floor cloth
[] at the bottom side
of the water tank
[].
3. Open the rubber cover
[]. Pour out the
remaining water.
4. Wipe the water tank
[] with a dry, soft
cloth. Allow the water tank to dry.
Cleaning the floor cloth
 Do not use fabric softener.
 Do not use bleach.
 Do not dry in the tumble dryer.
 Do not iron.
 Do not dry clean.
 Do not machine wash.
o Wash the floor cloth[] by hand at a water
temperature of 40°C.
 Storage
o Switch off the product by setting the on/off
switch
[] to Oposition (off)
o Clean the product (see “Cleaning and care”)
and let it dry completely.
o Store the product in its original packaging
if you do not intend to use the product for a
long period of time.
o Always store the product out of the reach of
children in a well-ventilated and dry place.
o Keep the product away direct sunlight.
o The ideal storage temperature is between
+5°C and +60°C.
o If you do not intend to use the product for
a long period of time, we recommend to
charge the product at least every 4weeks
(see “Charging the product”). In this
way, you maintain the performance of the
rechargeable battery.
 Replacement parts/
Accessories
o Customers can obtain compatible
replacement parts and accessories via
www.optimex-shop.com.