SilverCrest STVS 50 A1
English - 31
8. Before you start
8.1 Unpacking
• Remove the product from the packaging.
• Remove all package material.
• Check the packaging for any missing contents. Please contact Customer Service immediately if any
items are missing.
8.2 Mounting
• Figure C: Join the front (12) and back (11) half parts of the stand (13).
• Figure D: First, guide the power cable (14) through the base (13). Then place the tower fan (8) on
the base (13). Insert the 4 screws (31) through the base (13) from underneath into the relevant holes
in the tower fan (8) and screw them tight.
• Guide the power cable (14) under the base (13) as shown in the diagram below:
To Next Page
Loading...
