Silvercrest SVEB 160 A1 - Vacuum Containers and Bags (With Valve); Vacuum-Packing Vacuum Containers

32
GB
10. Vacuum containers
and bags (with valve)
Using the connection9 and a vacuum
tube20, you can vacuum-pack vacuum con-
tainers and bags with valves from various
manufacturers. For the different valves, the
following adapters are included in the items
supplied:
DANGER! Risk of electric
shock due to moisture!
~ Ensure that no liquid is sucked in during
the extraction of air. If this occurs, inter-
rupt the process immediately by press-
ing the stop button 8.
~ Please comply with the manufacturers’
instructions regarding the filling levels
for containers and bags.
NOTE: the vacuum containers and bags are
not included in the items supplied.
10.1 Vacuum-packing
vacuum containers
1. Fill the vacuum container to the maxi-
mum filling level and close the contain-
er lid.
2. Press one end of the vacuum tube20
into the connection9 on the right of the
device.
3. Fit the adapter21/22/23 suitable for
the valve onto the other end of the vacu-
um tube20.
4. Press the adapter A21 or B22 onto
the valve of the vacuum container. Hold
the adapter firmly in place.
Or:
Insert the adapter C23 into the valve
of the vacuum container.
5. Press the button 4. The LED lights
up. The vacuum-packing process starts.
6. After the vacuum-packing process, the
LED goes out and the vacuum-packing
process is complete.
7. Remove the vacuum tube20 and the
adapter21/22/23 from the vacuum
container and repeat the process if nec-
essary with another container.
8. After you have finished vacuum-pack-
ing, remove the vacuum tube20 from
the connection9.
Adapter e.g. suitable for
Adapter A21
Ernesto, FoodSaver
Lunchboxes
Adapter B22
FoodSaver fresh-
ness containers
Adapter C23
CASO, FoodSaver
storage boxes
9
20
22
9
20
23
__347713_Vakuumierer_B8.book Seite 32 Montag, 27. Juli 2020 12:36 12