Set snooze time
• Press the MODE button seven times. The currently set snooze period ap-
pears on the display (factory default SNO 10).
• Use the
UP and DOWN buttons to set the snooze time to a time between
1 and 59 minutes.
Setting 12/24 hour mode
• Press MODE eight times. The screen shows the 24 HR message for
24-hour mode.
• Press the
UP button to set the 24 hour mode.
• Press the
DOWN button to set the 12 hour mode.
12 HR is displayed on the screen. In the afternoon in addition PM is shown
on the screen.
Select display mode
You can select which information is shown on the screen when the radio is
switched off.
The selected mode is indicated by a corresponding symbol on the screen.
When the radio is switched off, select the display mode by repeatedly
pressing the
FINE button in accordance with the following table:
Symbol on the screen display mode
CLOCK only the time is displayed
CITY the time and world time are shown in succession
DATE the time and date are shown in succession
CITY DATE the time, date and world time are shown in succession
Alarm function
This multi-band radio provides you with two independently adjustable
alarm times, AL1 and AL2. You can programme for both...
...if the device should sound an alarm on every workday, at the
weekend, the whole week or on a single specific weekday;
...if the alarm should sound with an alarm tone or with the radio.
- 18 -
GB/CY
To Next Page
Loading...
