Setting the alarm time
You can set two alarm times in your world receiver.
• With the radio switched off, press the buttons
Vol.+/AL–1 (or Vol.-/AL–2).
The screen shows the most recently set alarm time and the symbol for
the alarm type.
• Press the
UP or DOWN button to move the alarm time forward or backward
at minute intervals. Hold down one of the buttons for a few seconds to
move the setting forward or backward quickly at 10 minute intervals.
• Press the
Vol.+/AL–1 (or Vol.–/AL–2) button until the desired alarm function
(see table above) is indicated on the screen.
• Press the
SNOOZE button to set the weekday on which you want the
alarm to sound:
You can select between workdays (Mo, Tu, We, Th, Fr), weekends (Su, Sa),
the whole week (Su, Mo, Tu, We, Th, Fr, Sa) or a single weekday.
The selected setting is shown on the display.
• Press the
SNOOZE button until the desired alarm days are set. Hold down
the
SNOOZE button until the screen shows an individual week day.
• Press the
SNOOZE button to set the desired week day.
To go back to selecting week days, weekend or every day, briefly hold
down the
SNOOZE button again.
• Press the
MODE button to save the setting and return to the time mode.
The setting is also saved if you wait around 15 seconds until the
screen returns to displaying the time.
Alarm function Symbol on the screen
Radio
Acoustic signals
Switched off No symbol
- 19 -
GB/CY
To Next Page
Loading...
