Silverline 631320 - Introduction and Specifications; Technical Abbreviations Key; Specification Details; Sound and Vibration Information

GB
4
Voltage: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 230-240V~ 50Hz
 Power: .........................................................810W
No load speed: ..............................................250m/min
Belt size (W x L): ........................................... 76 x 533mm
 Powercordlength: ............................................... 1.8m
Protection class: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Ingress Protection..................................................IP20
Weight: .........................................................2.9kg
Aspartofourongoingproductdevelopment,specicationsof
Silverlineproductsmayalterwithoutnotice.
Sound and vibration information:
Sound pressure L
PA
: ........................................... 101dB(A)
 SoundpowerL
WA
: ...............................................90dB(A)
Uncertainty K:.....................................................3dB
Weighted vibration a
h
:.........................................4.135m/s
2
Uncertainty K:..................................................1.5m/s
2
The sound intensity level for the operator may exceed 85dB(A)
and sound protection measures are necessary.
Specication
WARNING:Alwayswearearprotectionwherethesoundlevelexceeds85dB(A)andlimitthetime
ofexposureifnecessary.Ifsoundlevelsareuncomfortable,evenwithearprotection,stopusingthe
toolimmediatelyandchecktheearprotectioniscorrectlyttedandprovidesthecorrectlevelof
sound attenuation for the level of sound produced by your tool.
WARNING: User exposure to tool vibration can result in loss of sense of touch, numbness, tingling
and reduced ability to grip. Long-term exposure can lead to a chronic condition. If necessary, limit
thelengthoftimeexposedtovibrationanduseanti-vibrationgloves.Donotoperatethetoolwith
handsbelowanormalcomfortabletemperature,asvibrationwillhaveagreatereffect.Usethe
guresprovidedinthespecicationrelatingtovibrationtocalculatethedurationandfrequency
of operating the tool.
Soundandvibrationlevelsinthespecicationaredeterminedaccordingtointernationalstandards.
Theguresrepresentnormaluseforthetoolinnormalworkingconditions.Apoorlymaintained,
incorrectly assembled, or misused tool, may produce increased levels of noise and vibration.
www.osha.europa.euprovidesinformationonsoundandvibrationlevelsintheworkplacethat
maybeusefultodomesticuserswhousetoolsforlongperiodsoftime.
Description of Symbols
Theratingplateonyourtoolmayshowsymbols.Theserepresentimportantinformationaboutthe
product or instructions on its use.
Wear hearing protection.
Wear eye protection.
Wear breathing protection.
Wear head protection.
Wear hand protection.
Read instruction manual.
Class II construction
(double insulated for additional protection)
Caution!
Conforms to relevant legislation and safety standards
Environmental Protection
Waste electrical products should not be disposed of
withhouseholdwaste.Pleaserecyclewherefacilities
exist.Checkwithyourlocalauthorityorretailerforrecyclingadvice
Introduction
ThankyouforpurchasingthisSilverlinetool.Thismanualcontainsinformationnecessary
forsafeandeffectiveoperationofthisproduct.Thisproducthasuniquefeaturesand,evenif
youarefamiliarwithsimilarproducts,itisnecessarytoreadthismanualcarefullytoensure
you fully understand the instructions. Ensure all users of the tool read and fully understand
this manual.
Original Instructions
V Volts
~, AC Alternating current
A Ampere
n Rated speed
Hz Hertz
W, kW Watt,kilowatt
/min or min
-1
Operations per minute
Technical Abbreviations Key
631320_Manual.indd 4 23/05/2017 17:24