Silverline 631320 - Guarantee and Compliance Information; Registering Your Purchase; Guarantee Terms and Conditions; CE Declaration of Conformity

810W Belt Sander631320
9
silverlinetools.com
Terms & Conditions
Silverline Tools Guarantee
This Silverline product comes with a 3 year
guarantee
Registerthisproductatwww.silverlinetools.comwithin30daysofpurchaseinordertoqualify
for the 3 year guarantee. Guarantee period begins according to the date of purchase on your
sales receipt.
Registering your purchase
Registration is made at silverlinetools.com by selecting the Guarantee Registration button. You
willneedtoenter:-
• Your personal details
• Details of the product and purchase information
OncethisinformationisenteredyourguaranteecerticatewillbecreatedinPDFformatforyou
toprintoutandkeepwithyourpurchase.
Guarantee period becomes effective from the date of retail purchase as detailed on your sales
receipt.
PLEASE KEEP YOUR SALES RECEIPT
Ifthisproductdevelopsafaultwithin30daysofpurchase,returnittothestockistwhereit
waspurchased,withyourreceipt,statingdetailsofthefault.Youwillreceiveareplacement
or refund.
If this product develops a fault after the 30 day period, return it to:
Silverline Tools Service Centre
PO Box 2988
Yeovil
BA21 1WU, UK
The guarantee claim must be submitted during the guarantee period.
You must provide the original sales receipt indicating the purchase date, your name, address
andplaceofpurchasebeforeanyworkcanbe
carried out.
Youmustprovideprecisedetailsofthefaultrequiringcorrection.
ClaimsmadewithintheguaranteeperiodwillbeveriedbySilverlineToolstoestablishifthe
decienciesarerelatedtomaterialormanufacturingoftheproduct.
Carriagewillnotberefunded.Itemsforreturnmustbeinasuitablycleanandsafestatefor
repair,andshouldbepackagedcarefullytopreventdamageorinjuryduringtransportation.We
may reject unsuitable or
unsafe deliveries.
AllworkwillbecarriedoutbySilverlineToolsoritsauthorized
repair agents.
Therepairorreplacementoftheproductwillnotextendtheperiod
of guarantee
Defects recognised by us as being covered by the guarantee shall be corrected by means of
repairofthetool,freeofcharge(excludingcarriagecharges)orbyreplacementwithatoolin
perfectworkingorder.
Retainedtools,orparts,forwhichareplacementhasbeenissued,willbecomethepropertyof
Silverline Tools.
Therepairorreplacementofyourproductunderguaranteeprovidesbenetswhichare
additional to and do not affect your statutory rights as a consumer.
What is covered:
Therepairoftheproduct,ifitcanbeveriedtothesatisfactionofSilverlineToolsthatthe
deciencieswereduetofaultymaterialsorworkmanshipwithintheguaranteeperiod.
Ifanypartisnolongeravailableoroutofmanufacture,SilverlineToolswillreplaceitwitha
functional replacement part.
Use of this product in the EU.
What is not covered:
SilverlineToolsdoesnotguaranteerepairsrequiredasaresultof:
Normalwearandtearcausedbyuseinaccordancewiththeoperatinginstructionsegblades,
brushes, belts, bulbs, batteries etc.
The replacement of any provided accessories drill bits, blades, sanding sheets, cutting discs and
other related items.
Accidental damage, faults caused by negligent use or care, misuse, neglect, careless operation
or handling of the product.
Use of the product for anything other than normal domestic purposes.
Changeormodicationoftheproductinanyway.
UseofpartsandaccessorieswhicharenotgenuineSilverlineToolscomponents.
Faultyinstallation(exceptinstalledbySilverlineTools).
Repairs or alterations carried out by parties other than Silverline Tools or its authorized repair
agents.
Claims other than the right to correction of faults on the tool named in these guarantee
conditions are not covered by the guarantee.
CE Declaration of Conformity
The undersigned: Mr Darrell Morris
as authorised by: Silverline Tools
Declares that
This declaration has been issued under the sole responsibility of the manufacturer.
TheobjectofthedeclarationisinconformitywiththerelevantUnionharmonisationLegislation.
Identication code: 631320
Description: 810W Belt Sander
Conforms to the following directives and standards:
• Machinery Directive 2006/42/EC
• EMC Directive 2014/30/EU
• RoHS Directive 2011/65/EU
• EN60745-1:2009+A11:2010
• EN60745-2-4:2009+A11:2011
• EN55014-1:2006+A1:2009+A2:2011
• EN55014-2:1997+A1:2001+A2:2008
• EN61000-3-2:2014
• EN61000-3-3:2013
Notied body: Bureau Veritas LCIE
The technical documentation is kept by: Silverline Tools
Date: 21/09/2016
Signed:
Mr Darrell Morris
Managing Director
Name and address of the manufacturer:
PowerboxInternationalLimited,CompanyNo.06897059.Registeredaddress:
Powerbox,BoundaryWay,LuftonTradingEstate,Yeovil,SomersetBA228HZ,UnitedKingdom.
631320_Manual.indd 9 23/05/2017 17:24