Air Drill Reversible793759
7
silverlinetools.com
Maintenance
WARNING: Always disconnect from the air supply and depressurise before cleaning or carrying
out any maintenance.
Cleaning
• Keep your tool clean at all times. Dirt and dust will cause internal parts to wear quickly, and
shorten the machine’s service life. Clean the body of your machine with a soft brush, or dry cloth.
IMPORTANT: There is very little that can go wrong with your air tool and it should be noted that
when an air tool fails to work it is generally because the internal workings have corroded due to
dirty, wet air and failure to follow the instructions given below.
Daily maintenance procedure
Ifaninlinelubricatorisnotttedtotheairsupply,thetoolmustbemanuallylubricated:
1. Disconnect from the air supply.
2. Pour 3-4 drops of oil into the air intake.
3. Operate the machine at low speed to thoroughly lubricate all internal workings.
• If the machine is in constant use or used for long periods at a time, repeat the above procedure
up to 3 times per day.
• Use air tool oil. DO NOT UNDER ANY CIRCUMSTANCES USE NORMAL ENGINE OIL.
• Failure to comply with the operating and maintenance instructions may invalidate the guarantee.
Storage
• Store this tool carefully in a secure, dry place out of the reach of children.
Contact
For technical or repair service advice, please contact the helpline on (+44) 1935 382 222.
Web: www.silverlinetools.com
UK Address:
Toolstream Ltd.
Boundary Way
Lufton Trading Estate
Yeovil, Somerset
BA22 8HZ, United Kingdom
EU Address:
Toolstream BV.
Hogeweg 39
5301 LJ Zaltbommel
The Netherlands
Disposal
• As with other power tools, air tools should not be disposed of with household waste.
• Air tools may contain traces of tool oil and other lubricants and so must be recycled accordingly.
• Contact your local waste disposal authority for information on the correct way to dispose of
power tools.
793759_OwnerManual.indd 7793759_OwnerManual.indd 7 19/04/2024 08:5019/04/2024 08:50
To Next Page
Loading...
