Silverline 793759 - Description of Symbols; Specification

EN
4
Maximum operating pressure:.................................6.3bar (90psi)
Air consumption...........................................140L/min (5cfm)
Air Inlet:................¼” BSP, supplied with two male airline quick connectors
(EN-6 ‘UK’ and EQ-4 ‘European’ types)
Minimum hose diameter:........................................... 9.5mm
No load speed:.................................................1,800min
-¹
Chuck capacity:.....................................................10mm
Weight.............................................................1.1kg
Aspartofourongoingproductdevelopment,specicationsofSilverline
products may alter without notice.
Sound and vibration information:
Sound pressure L
PA
............................................. 89.7dB(A)
Sound power L
WA
...............................................100.7dB(A)
Uncertainty K ..................................................... 3dB (A)
Vibration emission value a
h......................................................................
0.89m/s
2
Uncertainty K .....................................................1.5m/s
2
The sound intensity level for the operator may exceed 85dB(A) and sound
protection measures are necessary.
Specication
Air Drill Safety Warnings
WARNING: Read and understand the safety instructions before installing, operating, repairing,
maintaining, cleaning, changing accessories on, or working near this tool. Failure to do so can result
inseriousinjury.
Save all warnings and instructions for future reference.
WARNING: This appliance is not intended for use by persons (including children) with reduced
physical or mental capabilities or lack of experience or knowledge unless they have been given
supervision or instruction concerning use of the tool by a person responsible for their safety.
Children must be supervised to ensure that they do not play with the tool.
• Onlyqualiedandtrainedusersshouldinstall,adjust,orusethetool.
• Donotmodifythetool.Modicationscanreducetheeffectivenessofsafetymeasuresand
increase the risks to the user.
• Do not discard the safety instructions; give them to the user.
• Do not use the tool if it has been damaged.
Description of Symbols
The rating plate on your tool may show symbols. These represent important information about the
product or instructions on its use.
Wear hearing protection
Wear eye protection
Wear breathing protection
Wear head protection
Wear hand protection
WARNING: Toreducetheriskofinjury,usermust.Readinstructionmanual.
Caution!
DO NOT use with compressed gas cylinders!
Conforms to relevant legislation and safety standards.
Environmental Protection
Air tools should not be disposed of with household waste. They contain traces of
oil and other lubricants. Please recycle where facilities exist. Check with your local
authority or retailer for recycling advice.
Introduction
Thank you for purchasing this Silverline product. This manual contains information necessary
for safe and effective operation of this product. This product has unique features and, even
if you are familiar with similar products, it is necessary to read this manual carefully to
ensure you fully understand the instructions. Ensure all users of the product read and fully
understand this manual. Keep these instructions with the product for future reference.
Original Instructions
n
0
No load speed
n Rated speed
psi Pounds per square inch
bar Metric unit of pressure
L/min Litres per minute
cfm Cubic feet per minute
Ø Diameter
min
-1
Operations per minute
BSP British Standard Pipe (thread)
dB(A) Decibel sound level (A weighted)
m/s
2
Metres per second squared (vibration
magnitude)
Technical Abbreviations Key
793759_OwnerManual.indd 4793759_OwnerManual.indd 4 19/04/2024 08:5019/04/2024 08:50