5.2.4.4 Cursor on Target
Figure 70 Cursor on Target Settings
Cursor on Target is an exchange standard that is used to share information about targets.
• CoT: Enable/disable cursor on target
• CoT IP Address/Port: IP address/port for the communication to establish
• CoT Message Interval (Seconds): How often to send CoT messages
• CoT Current Date (UTC): Time stamp of the date. If Set AS Current Date/Time is selected,
it will be set as the current time displayed on your computer
• CoT Current Time (UTC): Time stamp of the time
• CoT Stale Time (Seconds): Data outside of this time window becomes invalid
• CoT Type: The event type of the target