Silvus StreamCaster SC4400E - Setting up an Iperf Test; Required Equipment for Iperf Test; Running the Iperf Test Procedure

StreamCaster MIMO Radio User Manual 4/30/19
10017C000 Silvus Technologies Confidential Page
145
9.3 Voltage Reporting
The type, length and value for temperature reporting are listed in the following table:
Report Type
Data Type
Data
4001
START REPORT
Indicates start of voltage monitoring
report
1
END REPORT
Indicates end of report
4003
REVISION_REPORT
Indicates revision of this report,
currently always “1.1”
4004
CUR_VOLTAGE_REPORT
Current voltage value as a floating
point string
4005
MIN_VOLTAGE_REPORT
Minimum voltage seen so far, as a
floating point string
4006
MAX_VOLTAGE_REPORT
Maximum voltage seen so far, as a
floating point string
4007
UNDERVOLTAGE_COUNT
_REPORT
Number of times voltage dropped
below min threshold, as an integer
string
4008
OVERVOLTAGE_COUNT_
REPORT
Number of times vltage spiked above
max threshold, as an integer string.
Table 33 Voltage Reporting Format