Sim2 DOMINO Series - Page 46

•
HDMI 2 Setting: choose the HDCP configuration about the compatible input
signal. Select EDID1 for 480i/p, 576i/p, 720p, 1080i/p, or 2160p input signal.
Select EDID2 for non-interlaced signals only.
•
HDMI 1 EQ: is to set HDMI 1 equalizer value for short or long HDMI cable to
ensure all compatible signals passed between devices. Range [1..7].
•
HDMI 2 EQ: is to set HDMI 2 equalizer value for short or long HDMI cable to
ensure all compatible signals passed between devices. Range [1..7].
•
HDMI 3 EQ: is to set HDMI 3 equalizer value for short or long HDMI cable to
ensure all compatible signals passed between devices. Range [1..7].
•
Detail Filter: is a sharpness function. It can adjust image display from softer to
sharper. Range [0..2], where value 0 identify the O status.
Reset
Return the factory default settings for specified submenu.
•
Reset OSD: default settings for all OSD menus, except for the following
parameters: projection, Power mode, Security, Language, Networks items, Bright
Mode, Eco Mode, Total Lamp Hours.
•
Reset to Default: default settings for all OSD menus.
46
DOMINO4-H 25-28
User Guide