Page 3 / 26
1
Safety
1.1 Correct Usage
Pneumatic feeding of plastic granules or other dry bulk materials.
The machine is only intended for use of this type.
If the machine is used outside its field of application, SIMAR GmbH is not liable
for damage or faults arising during operation.
Before commissioning the drying machine, the Operating Manual must be read
carefully. The notes on safety information must be followed to the letter.
Only trained and fully inducted operating personnel are qualified to operate the
machines and to carry out maintenance work.
Correct usage also involves compliance with inspection and maintenance work
schedules.
1.2 Safety Markings
In this document the following signal words are used in combination with safety
signs to represent potential hazards.
Danger !
Fatality, serious injury or extensive damage to property will occur if the
relevant precautionary measures are not taken.
Warning !
Fatality, serious injury or extensive damage to property may occur if the
relevant precautionary measures are not taken.
Beware !
Slight injury may occur if the relevant precautionary measures are not
taken.
Caution !
Damage to property may occur, if the relevant precautionary measures
are not taken.
To Next Page
Loading...