Page 7 / 26
2
Transport
Danger !
Touching live parts is potentially fatal.
Even when making small changes in position, isolate the machine from
any external power source.
Before recommissioning the machine, it must be properly reconnected
to the mains.
Warning !
Risk of the pallet falling during transport.
Ensure equal loading of the pallet and that suitable means of transport
is used.
Ensure it is securely attached and that the load is distributed
horizontally.
Never stand under a suspended load.
Nominate a competent banksman for the lifting operation.
Pay attention to protect against external influences as hits,
moisture, dirt etc.
Only use a suitable transport vehicle with adequate load bearing capacity.
Ensure the load is reliably secure.
Prior to recommissioning, carefully fit and secure any parts that have had to
be removed for transport purposes.
On recommissioning, always power up in line with the Operating Manual.
Commissioning may only be undertaken by specially trained operating and
maintenance personnel.
To Next Page
Loading...