simatherm IH 070 - Technical data

smart mounting
®
© simatec ag Induction Heater IH 070/090 25
English
2.2 Technical data
IH 070
Voltage (± 9%): 100 V / 50-60Hz
110–120 V / 60Hz
220–240 V / 50–60Hz
Recommended circuit protection 20A circuit breaker
Power consumption (maximum) 1.5kVA (100 V / 50-60Hz)
3.7kVA (110–120 V / 60Hz)
3.7kVA (220–240 V / 50–60Hz)
Temperature control 0–250°C (32–482°F) in steps of 1°
Probe maximum temperature 250°C (482°F)
Time mode 0–60 minutes in steps of 0.1 minute
Power range 20–100% in steps of 20%
Demagnetisation, automatic Residual magnetism < 2A/cm
Overall dimensions 420 x 280 x 345mm
Area between supports (wxh) 145 x 205mm
Coil diameter 115mm
Weight (with yokes) 35kg
Workpiece maximum weight Bearing 80 kg, solid component 40 kg
Maximum heating temperature approx. 400°C (752°F)
Standard yoke dimensions 55 x 55 x 275mm (for
Ø of 78mm)
28 x 28 x 275mm (for
Ø of 40mm)
14 x 14 x 275mm (for
Ø of 20mm)