Advanced Parameters
A static IP address may be entered, along with the subnet mask, gateway address, and a DNS server.
This method is for advanced users only, with an additional prompt to confirm the settings.
Connectivity
Inputs
Each input may be personalized.
•
Label is the name of the input as it appears on the display. Select a predefined label or
manually enter a custom label.
•
Offset is a variable amount of gain applied to each input to fine-tune its volume level so that
source components connected to all inputs may have similar levels.
•
Enable makes an input available to select. It may be disabled to reduce the number of unused
inputs to scroll through.
•
Home Theatre Bypass disables volume control in this device. This mode sets the preamp
volume to unity gain for use with a separate audio-video receiver or home theater processor.
There is an additional prompt to confirm that a device with its own volume control is connected
to the input of the MOON 791 before activating this mode.
•
HDMI ARC (Audio Return Channel) is an HDMI audio input for use with a TV. CEC (Consumer
Electronic Control) enables multiple devices to share commands—such as Standby and
Volume—from a single remote control.
CEC Settings
• Audio Only enables audio but disables CEC commands.
• Audio + CEC Volume enables audio and CEC volume control but
disables other CEC commands.
• Complete enables audio and all CEC commands.
• Input Type converts Phono – Analog 1 from a line-level input to a phono stage.
To Next Page
Loading...
