• Disconnect an audio source when it should no longer transmit through this device.
Functionality
Remote Control
This unit may link with up to two BRM-1 remote control units at a time.
•
Link Remote searches for a nearby MOON BRM-1 remote control, displaying its unique ID on
both devices and permitting them to be associated.
•
Unlink Remote displays associated BRM-1 units permitting them to be disassociated from this
device.
•
Information displays useful details about the associated BRM-1 units.
Refer to the separate Guide included with the BRM-1 for more information.
MOONLink
MOONLink technology makes MOON products more intelligent.
A single button press can trigger automated behaviours and simultaneously operate multiple devices
over a network in a symbiotic MOONLink Group. MOONLink simultaneously toggles Standby and can
adjust display brightness for all devices in the Group, while enabling volume control and automatic
input selection of specific devices in the Group.
•
MOONLink Group permits the customization of a Group.
o
Name identifies a device within the Group.
o
Group ID assigns a Group number to a Device. Assigning the same ID to other devices
joins them together as a Group.
o
Status lists information about the device.
o
Firmware verifies the firmware of the device and updates it when necessary.
•
Available Devices lists devices on the network that could be added to a Group.
A MOONLink Group should include no more than one preamplifier.
Holding the
Standby button on the front panel for two seconds automatically toggles Standby mode
on all the devices in the MOONLink Group.
Standby Settings
• Full Power keeps most of the electronics powered up while in Standby.
•
Low Power powers down most of the electronics while in Standby.
•
Auto-Standby engages Low Power Standby after 20 minutes of inactivity.
Volume Settings
The highest volume setting of the preamp is 80.
•
Startup Volume sets a default initial volume level.
To Next Page
Loading...
