Phono
• Basic mode provides pre-set configurations for typical Moving
Magnet and Moving Coil phono cartridges.
• Advanced mode permits custom values for Gain, Impedance,
Capacitance, and EQ Curve.
Consult the documentation supplied with the cartridge for its
specifications or contact its manufacturer for assistance.
o The RIAA EQ Curve applies the standard frequency equalization
for vinyl record playback.
o The IEC EQ Curve is an adaptation of the RIAA curve with
reduced extreme low-frequency output to minimize their
potentially adverse effects in certain acoustic environments.
Consult your MOON Partner for help deciding which curve best
Analog Outputs
Each pair of analog outputs may be configured independently as a Variable-volume output for use as
a preamplifier or as a
Fixed-volume output for use with a device with its own volume control (like an
integrated amplifier).
When both pairs of outputs are set to
Fixed, volume commands are relayed to the next MOONLink
device in the signal chain.
Caution: The fixed volume level is extremely high! Lower the volume of the preamp or integrated amp
to which it is connected before setting the analog output of this device to Fixed.
Multiroom
The MiND Controller mobile app includes a feature to join multiple MiND 2 Zones together to play audio
as a cohesive system. In addition to streaming audio via the MiND 2, this device may also share audio
from any of its inputs with multiroom devices.
•
Original mode maintains the original signal through this device while digitally sharing a
digitized audio signal with other multiroom devices on the network.
•
Synchronized mode forces all the multiroom devices to share one synchronized digital audio
signal.
Bluetooth Audio
Devices may connect to this device to transmit their audio via Bluetooth to play through this device.
Before connecting for the first time, the two devices must be paired to each other.
•
Pair makes the device visible to nearby devices in pairing mode for up to 30 seconds.
To Next Page
Loading...
