HDMI ARC
HDMI (2.0b) connection for PCM audio input from an ARC-enabled TV
Functional
12V TRIG OUT
mini-jack (TS) connection for coupling a compatible power amplifier to synchronize Standby
behaviours
USB HOST
USB (type-A) connection for playback of files on a temporary hard drive using the MiND Controller
Compatibility is not guaranteed with every brand and model of USB drive, nor with every file system.
For the best performance and navigation experience, use a DLNA server on a UPnP device to share
the files over a network.
NETWORK
network (RJ-45) connections for Ethernet cables
• for connecting the device to a network router
• for extending the network to an additional device (eg, NAS device or TV)
• for MOONLink functionality with compatible MOON products
ANT
Wi-Fi antenna terminals for wireless network connectivity
The Ethernet and Wi-Fi connections do not bridge.
EXT. SUPPLY
for connecting bespoke external MOON power supply
IEC connecter & power switch
for connecting power cable and toggling the device on [I] and off [O]
With the power switch on, the unit may be toggled into and out of Standby using the button on the
front panel, a remote control, the MiND Controller, or by MOONLink. The unit may require up to a
minute to connect to the network. For best performance, the device should remain powered up and
may be toggled into Standby when not in use. It should be powered down during extended absences
by disconnecting the power cable.
Always power on the preamplifier before the power amplifier.
Always power off the power amplifier before the preamplifier.
To Next Page
Loading...
