3
IQ POWER CONTROL STATION
WITH SENSOR TECHNOLOGY
5201263 Rev D
2. DESCRIPTION
Simco-Ion’s IQ Power Control Station provides a power and communication hub
for IQ Power and IQ Easy devices.
The Control Station features a universal line voltage input and will operate on 100
to 240 VAC, 50/60 Hz. It can provide power & communication for up to ten
IQ Power or IQ Easy static neutralizing devices. The Control Station also allows
Warning / Fault relay output connections, a Standby (STBY) input connector,
Ethernet and a USB connector.
The display on the Control Station is a full color, backlit LCD with integrated touch
screen. This interface allows monitoring and control of the IQ Power / IQ Easy
static eliminating system. The control features four different operating modes for
static eliminators; fixed, manual, Auto-Tune and CLFB (Closed Loop Feed Back).
Along with providing a convenient user interface, the Control Station allows for data
logging of the system.
The Control Station also features a Fieldbus Interface that provides for a
factory installed module that provides network connectivity. A variety of fieldbus
communication protocols are available, such as EtherNet/IP, PROFIBUS DP-V1,
PROFINET IO, Modbus RTU, Modbus TCP, DeviceNet and ControlNet by use
of an HMS Industrial Network Anybus Module.
IQ Power system components, such as the BPS, HL, and HLC use 8-conductor
modular cable and RJ-45 connectors for connection. IQ Power devices are typically
supplied with a 7 foot modular cable assembly. Components, such as the IQ Easy
Static Bar, IQ Easy Sensor Bar, and IQ Power MPS use 5-conductor cable with
M12 connectors for connection. Cables are available by calling Simco-Ion customer
service (800) 203-3419 (refer to Section 8, Parts and Accessories).
To Next Page
Loading...