EasyManua.ls Logo

Simoniz 039-8563-8 - Starting Engine; Stopping Engine

Default Icon
27 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Engine Operation
16
5.
E
NGINE
O
PERATION
5.1 Adding/Checking Oil
IMPORTANT
Clean air filter (12) element for every 50 hours of use
(every 10 hours under dusty conditions). Wash in
high flashpoint solvent, squeeze dry, dip in clean en-
gine oil, and squeeze out excess oil.
Press the two clips hard, and pull out the air filter
element (12) and then wash it with clean water. Next,
soak the filter in engine oil, and then squeeze the oil
out. Place the air filter (5) back and re-clip the air filter
cover.
5.2 Starting Engine
IMPORTANT
If you have problems starting the pressure washer,
call the Simoniz toll-free number at
1-866-4SIMONIZ
(1-866-474-6664) and one of our customer service
representatives will be glad to assist you.
IMPORTANT
Before each use:
••
Check the oil and fuel level and fill if necessary.
••
Make sure that spark plug, muffler, fuel cap, and air
filter are in place and secured.
••
Do not crank engine with spark plug removed.
1. Set the engine
I/O
switch (15) to
I
position.
2. Pull the starter cord handle (17) slowly until
resistance and then pull rapidly to avoid
kickback.
CAUTION
Return the starter cord handle (17) gently to its start-
ing position to prevent damage to the starter or the
housing.
To stop the engine set the engine
I/O
switch
(15) to
O
position.
5.3 Stopping Engine

Related product manuals