Why is my Simoniz Pressure Washer engine difficult to start?
- RRobert HendersonJul 31, 2025
If your Simoniz Pressure Washer's engine is difficult to start, there might be a few reasons. First, ensure the 3 in 1 switch is in the “choke” position. Also, make sure the fuel tank is filled with regular gasoline. Excess water pressure could also be the culprit; release it by squeezing the trigger on the gun. Other potential issues include a clogged carburetor or carbon build-up on the spark plug, which may require cleaning. Finally, ensure you are using the correct starting method.