To Next Page
B
bankssteveAug 1, 2025
Why is my Simoniz Pressure Washer pump pressure inadequate or fluctuating?
- CCarrie JohnsonAug 1, 2025
If your Simoniz Pressure Washer pump isn't reaching adequate pressure, or if the pressure fluctuates, several factors could be responsible: * The water inlet filter might be clogged: remove and clean the filter. * The pump could be drawing air: tighten the connections and bleed the system. * The suction valves could be clogged or worn: clean or replace the valves. * The diameter of your garden hose might be too small: replace it with a _ inch garden hose. * The water supply might be restricted: check the hose for kinks or leaks. * There might be insufficient water supply: fully open the water source.
General
