SimPal-G400 4G Alarm Camera User Manual
27
3.3 Add User number and receiver e-mail
Master sends following SMS message in order to:
Add User number: #06#+44.......#
Up to 4 user numbers can be stored on one camera.
Request to add country code in front of mobile phone number.
Camera can send photos by e-email. It allow to add 5 receiver email address for one
camera.
Add receiver email address: #06#xxxx@email.com#
Up to 5 user email email can be stored on one camera.
Master sends following SMS message in order to:
Check User and email: #06#
To Next Page