SimPal G400 - Power On; off

SimPal-G400 4G Alarm Camera User Manual
23
2.2 Power on/ off
Power on/ off
Power on:
Operation Indicator light
Turn the power
switch to “On”
position.
It will beep ring and red LED flash
for 30 seconds
Power on 4G module
Red light flash fast for 10 seconds 4G module power on and
search network
A long beep ring and LED flash slow
in Red or Green
Register 4G network
success.
Note:
If device beep three times and LED flash fast, it means register 4G network failed. Please check
the SIM card PIN mode or this location 4G signal, needs to disable SIM card PIN code on mobile
phone and select good 4G signal location.