SimPal-G400 4G Alarm Camera User Manual
37
Set auto disarm: #10#value#
Value range from 0-5, when set value 0, it will turn off auto disarm function. 1-5
means auto disarm after 1-5 times alarm.
4.6 PIR motion detection
Camera come with built-in PIR motion detector, it will send alarm messages or
photos when camera set in alarm mode. Master user sends following SMS message
in order to:
Built-in PIR detector function - ON (default): #17#1#
Built-in PIR detector function - OFF: #17#0#
4.7 Image Settings
Master or User sends following SMS message in order to:
To Next Page
Loading...