SimPal-G400 4G Alarm Camera User Manual
46
User Name
Password
Type: name is this setting, normally the type is “mms”
If the User name and Password is empty, only leave blank and separate with #.
Check camera MMS settings: #25#
5.2 Cellular data APN settings
When camera power on, it will check network status. When cellular or WiFi connected, it
will display LED in green color, when network disconnect, it will display LED in red color.
It may needs to set APN to make camera connect 4G network.
Master or User sending following SMS to:
To Next Page
Loading...