SimPal-G400 4G Alarm Camera User Manual
35
4.4 Set schedule alarm
Master or User can set 3 groups schedule to make camera auto on/off alarm.
Camera will set alarm on/off when it reach the schedule settings.
It allow temporarily change alarm on/off manually, but it will process schedule
alarm again when it reach next time period.
Master or User sends following SMS message in order to:
Set schedule alarm: #46#ID#WorkDay#StartTime#EndTime#
ID: means 3 group schedule alarm. The value range 1-3.
WorkDay: Value range from 1-7, means Monday- Sunday. Allow several day values in
one command, for example 12345 means from Monday-Friday.
StartTime and EndTime: Be consists of 4 digits (hh:mm) and works on a 24 hour clock.
To Next Page
Loading...